Xenon Headlight Ballast Control Unit 5DV009932-00 for Porsche Cayenne Vauxhall

Replace your failed or flickering HID ballast with this premium control module. This xenon headlight ballast replaces the control unit on Porsche Cayenne 92A and Vauxhall Insignia cars that use number 5DV009932-00. The live compatibility list also includes the Audi Q5 from 2021 to 2023, and the existing description includes the Vauxhall Astra J.

Features

• 5DV009932-00
• 95863159701
• 1207255
• 13434016
• 39005790445
• The label reads Xenon Ballast 12V and 5DV 009 932-00
• Voltage: 12 V
• Wattage: 35 W
• Current: AC
• Bulb marking on the label: D3S
• Mounting: screw-on
• Plug-and-play on the factory connector when the number matches
• Direct replacement for the original HID ballast control unit
• Maintains correct operation of xenon low beam, high beam and other lighting functions
• High-quality electronics and a sealed housing ensure durability and reliability
• Plug-and-play installation with factory connectors

Compatibility

• Porsche Cayenne (92A) 2010-2023 with xenon headlights
• Vauxhall Insignia (Mk I, G09) 2008-2017 with xenon headlights
• Vauxhall Astra J 2009-2015 with xenon headlights
• Audi Q5 (FY) 2021-2023
• Porsche Cayenne (92A) 2010-2017 with xenon headlights

Installation

1. Disconnect the battery and remove the headlamp.
2. Unplug the old ballast and fit this one.
3. Reconnect the wiring, refit the lamp and test the lights.
4. Match 5DV009932-00 to the number on your original ballast. Adaptive systems may still need fault clearing if a warning remains.
5. Unplug the faulty ballast and remove it
6. Install the new ballast and reconnect the wiring
7. Reassemble the headlamp and reconnect the battery
8. Test all lighting functions to ensure proper operation

Notes

• Compare 5DV009932-00, 95863159701, 1207255 or 13434016 with your original unit.
• 39005790445 is stamped on the housing in the gallery.
• Keep the module dry while it is out of the lamp.
• Coding: like-for-like new ballast/driver replacements that match the OE part number are typically plug-and-play with no coding required. Always match the number on your original module. Adaptive/AFS headlight systems or used modules may still need coding, initialisation or fault clearing with diagnostic tools if warnings remain.
• Ensure part numbers match before ordering
• Professional installation recommended; avoid moisture exposure during replacement