LED Headlight Control Module Unit A1769001204 for Mercedes A W176 CLA C117 X117

Replace your failed or flickering headlight control unit with this premium OE-spec module. Engineered to restore proper lighting functions, it provides a direct plug-and-play solution for the part numbers referenced. This LED headlight control module, part A1769001204, replaces the original unit on the Mercedes-Benz A-Class W176 and CLA C117 and X117.

Features

• A1769001204
• Quantity: 1
• LED headlight control module
• Aluminium heatsink housing
• Direct fit with the factory connector
• Replaces the original ballast/control unit to restore headlight performance
• Ensures correct operation of daytime running lights, low/high beam, indicators or adaptive functions (as applicable)
• High-quality electronics and sealed housing provide reliable, long-lasting service
• Direct fit with factory connectors - no modifications needed

Compatibility

• Mercedes-Benz A-Class (W176)
• Mercedes-Benz CLA (C117)
• Mercedes-Benz CLA Shooting Brake (X117)
• Mercedes A-Class (W176)
• Mercedes CLA (C117)

Installation

1. Disconnect the battery and remove the headlamp assembly.
2. Unplug the faulty module and remove it from the headlight.
3. Fit the new module and secure it with the original screws.
4. Reconnect the wiring, refit the headlamp and test the lights.
5. Install the new module and secure it using the original screws
6. Reconnect wiring, reinstall the headlamp and test all lighting functions

Notes

• Compare A1769001204 with the number on the label of your original module before ordering. The same number is printed on this unit.
• Smaller hardware and software lines on the label were not clear enough to add as further part numbers.
• A like-for-like new module that matches the original part number is often plug-and-play. Adaptive systems, or a used module, may still need coding or light initialisation if a warning remains.
• Professional fitting is recommended.
• Please match the part numbers and ensure compatibility with your vehicle before ordering.
• Professional installation is recommended for optimal results.
• Coding: new like-for-like replacements that match the OE part number are often plug-and-play. Adaptive / ILS / AHL systems, or used modules, may need coding, adaptation or light initialisation - consult a specialist if warning lights remain after fitting.
• 1-year warranty covering manufacturing defects