Restore your Vauxhall’s tyre pressure monitoring system (TPMS) with this pre-programmed sensor. Operating at 433 MHz, it replaces the factory unit without any need for coding and provides accurate pressure readings to maintain safety, fuel efficiency and tyre life.

Compatible OE numbers

• 13598773
• 13506028

Compatibility

• Vauxhall Mokka (2012‑2016)
• Vauxhall Mokka X (2016‑2020)
• Also suitable for Vauxhall Viva models using OE numbers 13598773 / 13506028

Features

• Easy installation and wireless operation.
• Screw‑in mount; direct‑fit replacement.
• No programming required.
• Suitable for front, rear, left or right wheel positions.
• 1‑year warranty.

Installation and programming

1. Remove the wheel and deflate the tyre completely.
2. Unscrew the old TPMS sensor from the rim.
3. Install the new sensor and tighten the mounting nut to the recommended torque.
4. Reinflate the tyre, balance the wheel and mount it back on the vehicle.
5. Drive at 25 mph (40 km/h) or more for 10–15 minutes; the sensor should register automatically.
6. If the warning light persists, perform a TPMS relearn via vehicle settings or an OBD‑II TPMS tool.

Troubleshooting

• Ensure tyre pressures and sensor installation are correct if the warning light stays on.
• Verify that the part number matches your original sensor.
• This sensor works on 433 MHz systems and is not compatible with 315 MHz systems.

Important notes

• Includes one pre‑programmed TPMS sensor.
• 1‑year warranty covering manufacturing defects and battery failure.
• Pre‑programmed for your vehicle; use the relearn procedure if your ECU does not recognise the new sensor.