Stubby Short 80mm Carbon Fibre Bee-String Car Aerial for MINI R57 Convertible

Upgrade your radio reception and give your vehicle a sporty look with this stubby replacement aerial. Its compact design reduces wind noise compared to the factory bee-sting antenna. It is sold for the MINI Cooper S and the MINI John Cooper Works (JCW) on chassis R50, R52 and R53.

Features

• About 80mm long; the product photo marks the aerial at 3 inch
• Carbon-fibre style finish
• Brass adapter screws labelled M4 (4mm), M5 (5mm) and M6 (6mm)
• One further black threaded adapter, about 1 inch long
• Two washers, each marked about 0.6 inch
• Quantity: 1 aerial, with the adapters and washers shown
• Female thread in the base for the chosen adapter
• Approximately 80mm length for a sleek profile
• Hydro-dipped carbon-fibre style adds a premium appearance
• Includes three adapter screws (M5, M6, M7) for a secure fit
• Simple screw-on installation

Compatibility

• MINI Cooper S (R50)
• MINI Cooper S (R52)
• MINI Cooper S (R53)
• MINI John Cooper Works (R50)
• MINI John Cooper Works (R52)
• MINI John Cooper Works (R53)

Installation

1. Unscrew the existing aerial mast from the base.
2. Choose the M4, M5 or M6 adapter, or the black adapter, so the thread matches the base.
3. Fit a washer if the base needs one, then screw the aerial on until it is snug.
4. Unscrew your existing antenna mast from the base.
5. Select the correct adapter screw and attach it to the stubby aerial.
6. Screw the new aerial onto the base until snug.

Notes

• Compare the thread in your existing base before ordering.
• Aerial only. The radio base stays on the car.
• Please check your existing antenna base type before ordering.
• Aerial only-radio base is not included.